More settings
This section describes the features and settings of the TV that were not covered in
the other parts of this guide.
Changing network settings
If needed, you can change your network settings at any time. For example, if you
change the name of your wireless network (its SSID) or its password, you will need to
change your TV’s settings so that it can continue to connect. Also, if you decided not
to connect to the Internet in Guided Setup, you can use network settings to connect
at a later time.
To change network settings, from the Home screen menu, navigate to Settings >
Network, and then press the RIGHT arrow. At this point, you can choose the following
options:
• About – Lists important information about your current network connection,
such as status, connection type, IP addresses, and MAC address. This
information is often useful when contacting customer support with connection
issues.
• Check connection – Select your existing network connection type, and then
press OK to start checking the network connection. The TV uses your current
network information to reconfirm the wireless or wired network connection to
the local network and the Internet connection.
• Set up connection – Select a network connection type, and then select the option
to set up a new connection. Follow the on-screen instructions to complete the
network connection. For help with each of the steps, see Network connection.
To Next Page
Loading...
