The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200X200 refers to
the fact that the mounting measurements are 200mm horizontally and 200mm vertically. Follow the instructions that
come with the wall mount. Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid
causing damage.
Warning:
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:
– Using cabinets or stands recommended by the manufacturer of the television set.
– Only using furniture that can safely support the television set.
– Ensuring the television set is not overhanging the edge of the supporting furniture.
– Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the
furniture and the television set to a suitable support.
– Not placing the television set on cloth or other materials that may be located between the television set and
supporting furniture.
– Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
Step 2
Power up
In this step, we’ll make sure all systems are GO!
Power your TV remote by inserting the included batteries.
Connect your power cable to the TV, then plug it in to the wall outlet.
Connect other devices by referencing port label and descriptions on the bottom of page 7.
To Next Page
Loading...
Need help?
General
