Need help?Do you have a question about the TCL MS1G and is the answer not in the manual?
General| Brand | TCL |
|---|---|
| Model | MS1G |
| Category | Wireless Router |
| Language | English |
Connect your internet modem's LAN port to the MESH node's WAN port using the included Ethernet cable.
Connect the node to a power source. Wait for the LED to show solid on, then blink green to confirm startup.
On your mobile device, select the primary node's SSID and enter its password from the bottom label.
Launch the TCL WiFi App and follow on-screen instructions to establish the primary node's internet connection.
Place nodes in open areas, limiting walls between them and avoiding interference sources like microwaves.
Connect secondary nodes to power. Wait for LED to light solid green, then blink green indicating connection.
LED colors indicate status: solid green for good connection, yellow for fair, and red for disconnected.
Remove nodes via the app by tapping them and selecting delete. Add new nodes through Settings > Add MS1G.
Learn how to restore factory settings by holding the RST button, and connect 2.4 GHz devices using the Smart Assistant.
Switch off device in specific locations (healthcare, aircraft, flammable areas) and maintain distance from body/medical devices.
Handle device with care, keep clean, and protect from adverse weather, moisture, and dust. Observe operating temperature limits.
Do not open, dismantle, drop, throw, bend, or paint the device. Use only TCL-approved adapters and accessories.
Device meets international radio wave exposure guidelines, designed not to exceed recommended limits for safety.
Device complies with FCC Part 15 rules, subject to conditions to prevent harmful interference and accept received interference.
Provides internet address, support contact, manufacturer details, address, and radio frequency power specifications.
Details Wi-Fi Alliance certification and restrictions, such as the 5150-5350 MHz band being indoor-use only.
Manual descriptions may vary from device operation due to software; TCL is not liable for such differences or consequences.
Requires proof of purchase (invoice/slip) with date, dealer, model, and serial number for warranty support.
Applies to the first purchaser for defects in material, design, and workmanship, excluding normal wear and tear.
Excludes damage from abuse, misuse, unauthorized repairs, accidents, acts of God, and causes beyond TCL's control.
TCL may repair or replace products using new or used parts equivalent to new performance and reliability.
Customers must back up their data as TCL is not liable for loss of saved/stored data during repair or replacement.
Customer pays shipping to authorized repair centers and is responsible for any damage during transit.
To Next Page
