Teac 450 - Optional Accessories; Specifications

Specifications
Optional accessories
Optional accessories
Type of Tape
Hi-Fi tape:
Signal to Noise Ratio
Outputs
Line
Line
13
ffll
Specifications
Heads
TZ-261
Head and rubber
cleaner
HP-101
Dynamic
headphone (8 ohms)
WR-134
DIN connector
cord
MTT-150
Dolby level
calibration tape
Power Requirements
Dimensions
Fast Winding Time
Inputs
Wow and Flutter
Frequency Response
Tape Speed
Motor
MC-201
Electret condenser
microphone
Head
Demagnetizer
Weight
*
m ri
Two, erase and record-playback.
4 track 2-channeI stereo
Cassette tape C-60 and C-90
(Philips type)
1-7/8 ips
Hysteresis synchronous outer-rotor
motor
0.07 %
Chromium dioxidetape: 30-16.000 Hz
(+2, -3dB 40-14,000 Hz)
: 30- 1 3,000 Hz
(+2, — 3dB 40-12,500 Hz)
Regular tape : 30 10,000Hz
(+2, -3dB 40-10,000 Hz)
52 dB
60 dB (With Dolby process)
Approximately 95 seconds tor C-60
Microphone : 0.25 mV/-72 dB
(600 -10,000 ohms)
: 0.1 V, 100,000 ohms
or more
: 0.3 V for load imped 
ance of 10,000 ohms
or more
Headphones : 8 ohms
117 VAC, 60 Hz, 18 W
6-15/16 ” (H)x 17-1/2 ” (W)
xIO-5/8 ” (D)
21 lbs, net
Specifications were determined using Hi-Fi tape except as
noted.
* Feature and specifications subject to change without notice.
Standard Input-output connection cord
Accessories Fuse
Silicone cloth
Cleaning stick
Plastic cover