Need help?Do you have a question about the Teac A-400 and is the answer not in the manual?
Instructions for replacing the heads and pinch roller assembly.
Procedure to measure and adjust pinch roller pressure.
Steps for adjusting tape speed and measuring wow/flutter.
Steps for verifying and adjusting playback performance, including azimuth and output levels.
Guide to adjusting bias, record level, and distortion for recording.
Diagnoses and possible cures for tape transport mechanism issues.
Diagnoses and possible cures for audio amplifier circuit problems.
Instructions for replacing the heads and pinch roller assembly.
Procedure to measure and adjust pinch roller pressure.
Steps for adjusting tape speed and measuring wow/flutter.
Steps for verifying and adjusting playback performance, including azimuth and output levels.
Guide to adjusting bias, record level, and distortion for recording.
Diagnoses and possible cures for tape transport mechanism issues.
Diagnoses and possible cures for audio amplifier circuit problems.
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Total Harmonic Distortion | 1.5% |
| Heads | 1 x record/playback |
| Motor | 1 x DC motor |
| Frequency Response | 30Hz to 16kHz |
| Tape Type | CrO2 |
| Power Supply | 220V, 50Hz |
To Next Page
