Need help?Do you have a question about the Teac A-4010S and is the answer not in the manual?
General| Signal to Noise Ratio | 50dB |
|---|---|
| Total Harmonic Distortion | 1.5% |
| Output Level | 0.3V (line) |
| Type | Reel to Reel |
| Track System | 4-track, 2-channel, stereo system |
| Heads | 3 heads |
| Reel Size | 7 inch reel |
| Tape Speed | 3 3/4 ips, 7 1/2 ips |
| Wow and Flutter | 0.08% (7 1/2 ips) |
| Frequency Response | 30Hz |
| Output Voltage | 0.3V |
| Input Sensitivity | 50mV (line) |
| Motor | 2 motors (capstan and reel) |
Optional cord with DIN connectors for inter-connection.
Instructions for playing a tape on the A-4000S player.
Instructions for playing a tape on the A-4010S deck.
Steps to play a monophonic tape on the A-4000S player.
Steps to play a monophonic tape on the A-4010S tape deck.
Details on recording stereo sound from microphones or line inputs.
Steps for recording, including setting controls and monitoring.
Instructions for monophonic recording from various sources.
Steps for selectively erasing portions of tape.
Procedures for cleaning heads and components.
Instructions for demagnetizing tape heads to maintain performance.
Guidelines for lubricating moving parts after specific usage.
How to change the power supply voltage for the equipment.
Steps to convert the equipment's operating frequency.
To Next Page
