Teac AG-V4200 - Buttons for the Operation of Other TEAC Components

Buttons for th
Components
e Operation of Other TEAC
6
2
2
a a
TAPE DOWER
VCR 2 MONITOR AUx/Tv || [xe
Co CO
Co
LEO OOO
cp
SYNC
oo
oOo
oH06
FM_ MEMORY
SCAN
MODE
RECORD
RECORD
aor a ae ee
DISC SKIP
MUTING
DISPLAY| BYPASS.
TEST
TONE |3 STEREO
CENTER
PRO
MODE | LOGIC
CENTER LEVEL
v a
CJ] (3
REAR LEVEL
v
=
. >
L
YY VOLUME &
TE
AC
UR-407 REMOTE CONTROL UNIT LTR
sons
CD SYNC button
When the receiver is used in a system with a
TEAC CD Player and a TEAC cassette deck (with
full-logic control), it is possible to synchronize the
operations of the CD player and cassette deck, so
that they can be started at exactly the same time
for copying a CD onto a tape.
In this configuration, the CD player's CD/DECK
SYNC terminal and the cassette deck's CD/DECK
SYNC terminal should be connected using the
optional WR-7000 sync cable.
Synchronized operation of the CD player and
cassette deck can be started by pressing either the
CD SYNC button on the remote control unit or the
CD SYNC button on the cassette deck.
2| TAPE | buttons
The TAPE | mechanism of a double-transport
cassette deck with full-logic control can be
operated using these buttons.
Notes:
© To start recording, simply press the RECORD
button; it does not have to be pressed together with
PLAY.
@ If the TAPE | mechanism of the double-transport
cassette deck does not have a recording function,
pressing the TAPE | RECORD button will have no
effect.
[3] TAPE I! buttons
The TAPE Il mechanism of a double-transport
cassette deck with full-logic control can be
operated using these buttons. They are also used
to operate a single-transport cassette deck with
full-logic control.
Note:
© To start recording, simply press the RECORD
button; it does not have to be pressed together with
PLAY.
CD buttons
© SKIP (<4, »1) buttons: Each time these are
pressed, the pickup moves to the beginning of the
next tune in either the forward or reverse direction.
If held depressed, skipping continues until the
button is released.
@ PAUSE (11), PLAY/PAUSE (b> /) buttons: To
temporarily stop CD play, press the PAUSE button if
the CD player has an independent PAUSE button;
press the PLAY/PAUSE button if it has a
PLAY/PAUSE button.
@ STOP () button: Press to stop the CD player.
@ DISK SKIP button: Selects the next disc in a CD
auto-changer.