Need help?Do you have a question about the Teac AGV1050 and is the answer not in the manual?
General| Power Output | 100W per channel (4 ohms, 1kHz, 0.8% THD) |
|---|---|
| Frequency Response | 20Hz - 20kHz +/-1dB |
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | 95dB (Line In, IHF-A) |
| Dimensions | 435 x 142 x 355 mm |
| Weight | 10.5 kg |
| Total Harmonic Distortion (THD) | 0.08% (1kHz, 1W, 8 ohms) |
| Speaker Impedance | 4-16 ohms |
| Speaker load impedance | 4-16 ohms |
| Total Harmonic Distortion | 0.08% (1kHz, 1W, 8 ohms) |
Comprehensive list of safety instructions for operating the audio equipment and preventing hazards.
How to connect speakers and match impedance using the rear panel selector.
Information on battery installation, precautions, and effective operation of the UR-402 remote.
Solutions for problems related to remote control and tuner functions like auto tuning.
Solutions for issues with sound output, channel balance, low frequencies, hum, and noise.
Detailed technical data for amplifier, tuner, video sections, power requirements, and dimensions.
To Next Page
