Teac AI-101DA - Specifications; Amplifier Section; Digital Audio Input

26
Amplifier Section
Maximum power output .................... 26 W + 26 W
(JEITA 10%, 1 kHz, 4 Ω)
Rated power output ........................ 20 W + 20 W
(JEITA 1%, 1 kHz, 4 Ω)
TTotal Harmonic Distortion ....... 0.02% (1 kHz, 4 Ω, 1W)
Signal-to-noise ratio
LINE IN .......... 90 dB (IHF-A/LPF 20kHz 1kHz 2V input)
Frequency Response ............ 20 Hz – 45 kHz (−5 dB)
Digital audio input
Optical digital connector × 1. . . −24.0 to −14.5 dBm peak
USB port (type B) connector ..................... USB 2.0
Supported sampling frequencies (PCM)
32/44.1/48/88.2/96/176.4/192 kHz
Supported bit lengths ........................ 16/24 bits
Bluetooth
Bluetooth version .....................................3.0
Output ...........................................Class 2
Supported profiles ................................. A2DP
Codec ....................................SBC, AAC, aptX
Headphones output
Rated output .......... 100 mW + 100 mW (32 Ω, 1 kHz)
Total harmonic distortion ......................... 0.03%
Specifications