Teac BX-550 - Specifications and Service Data; Specifications; Service Data

BX-550/BX-330
1
SPECIFICATIONS AND SERVICE DATA
e Improvements may result in features or specifications changing without notice.
SPECIFICATIONS
Input Sensitivity
PNONO MC
PHONO MM
TUNER, AUX
TAPE 1,2
Rated Output Voltage
TAPE REC 1, 2
Rated Output Power
(Both channels driven, Distortion 0.1%,
Impedance 8 ohms, 1 kHz)
Required Speaker Impedance
SPEAKERS selector in position A or B
Dimensions
Width x Height x Depth
Weight
Power Requirements
SERVICE DATA
BX-550 BX-330
50 pV/33 ohms 50 uV/15 ohms
2.5 mV/47 k ohms 2.5 mV/47 k ohms
150 mV/10 k ohms 150 mV/10 k ohms
150 mV/10 k ohms 150 mV/10 k ohms
150 mV/2.2 k ohms 150 mV/2.2 k ohms
55W+55W 35W+35W
8 ~ 16 ohms 8 ~ 16 ohms
410 x 140 x 320 (mm)
(16-1/8" x 5-1/2" x 12-5/8”)
9 kg (19-13/16 Ibs) net
410 x 140 x 320 (mm)
(16-1/8" x 5-1/2” x 12-5/8"}
7.5 kg (16-9/16 Ibs) net
Voltage Power Consumption (W)
(V) (Hz) BX-550 BX-330
GENERAL EXPORT 100, 117, 220, 240 50/60 | 100i] SY
PEUROPE. 220 2 0 100 | 8
U.K.,AUSTRALIA, [| 240s | SC se | St“ s|
U.S.A., CANADA Rs |
The power requirements for products distributed in the U.K., Australia, Canada and the United States
and certain other areas in Europe are not adjustable.
Power Muting Time 3 ~ 8 Seconds LOUDNESS Control
— AUX Section —— Output: 150 mV
TONE Controls 1kHz: 0 dB (reference)
Input: 7 mV + 3 dB 100 Hz: +8dB+1dB
Output: 1V 20 kHz: +5 dB +1dB
MUTING Circuit (BX-550)
Output: MUTING OUT, 10 V at 1 kHz
BASS: FLAT
TREBLE:
FLAT
OdB:1dB
|
OdB
(Ref.)
0dB+1dB
MUTING
IN,
0.9
V
+2
dB
BASS: MAX LOW CUT Filter (BX-550)
+7dB+ dB+1dB +7dB+1dB
TREBLE: MAX ical : Output: LOW CUT OUT, 10 V at 20 Hz
BASS: MIN | oae148 | LOW CUT IN, 7V+1dB
-7dB+1dB | 0dB+1dB -7dB+1dB Z
TREBLE: MIN al TONE OUT Circuit (BX-550)
Harmonic Distortion a) Frequency Response
Output: 55 W (BX-550), 35 W (BX-330) TONE: OUT, VOLUME Control: MAX
20 Hz: Less than 0.01% Output: 1 V at 1 kHz (reference)
1kHz:
Less
than
0.008%
10
Hz:
=
dB
20
kHz:
Less
than
0.1%
_
+0
Maas 100 kHz: *° dB
More
than
42
dB
(ratio)
at
1
kHz.
b)
Harmonic
Distortion
Noise
Level
20
Hz:
Less
than
0.01%
VOLUME
Contro!:
MAX,
INPUT:
Shorted
1kHz:
Less
than
0.008%
Less
than
560
zV
(-65
dB),
Weighted
20
kHz:
Less
than
0.1%
Damping Factor
43 or more at 1 kHz, 82
21 or more at 20 kHz, 82
c) Noise Level
Less than 320 uV (-70 dB), Weighted