To add a track to the end of the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until "00" appears on the display.
Select a track number by pressing the
SKIP/SEARCH button, and then press the
MEMORY/CLOCK ADJ button.
The track is added to the end of the program.
12
Programmed Playback (2)
To clear program
In the stop mode, do either of the following to clear
the program:
Press L
on the disc cover and open it.
Press the MEMORY/CLOCK ADJ button and then
the STOP (H
) button.
<
If the unit is disconnected from the power supply for
more than 3 minutes, the programmed contents will
be cleared.
To cancel the program playback mode
Press the STOP (H) button. "MEMORY" indicator
disappears, but the programmed contents aren’t
lost.
To return to the program mode, press the
MEMORY/CLOCK ADJ button.
To check the programmed order
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly to show the track numbers that
have been stored in memory.
To overwrite the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until the track number to be
changed appears on the display.
Select a track number by pressing the
SKIP/SEARCH button, and then press the
MEMORY/CLOCK ADJ button.
To Next Page
Loading...
