Teac LT-1 - Programmed Playback; Programming Tracks

Repeat step and to program more tracks.
<
You can program up to 20 tracks.
<
To cancel the program mode, press the STOP button
(H
).
When the selection of track numbers has been
finished, press the PLAY/PAUSE button (y
/J) to
start program playback.
If the PLAY/PAUSE button isn't pressed within 10
seconds, the MEMORY indicator will go off. In that
case, press the MEMORY/CLOCK ADJ button and
then press the PLAY/PAUSE button to start program
playback.
The programmed contents are kept in memory even
after the TUNER button is pressed or the power is
turned off.
4
32
Up to 20 tracks can be programmed in the desired
order.
<
Shuffle playback does not work during program
playback.
<
Insert a disc and select "CD" before beginning
programming.
Press the MEMORY/CLOCK ADJ button in the stop
mode.
"MEMORY" indicator blinks, and "P-01" appears on
the display.
Within 10 seconds, press the SKIP/SEARCH button
to select a track.
<
If the SKIP/SEARCH button isn't pressed within 10
seconds, program mode will be canceled.
While "MEMORY" is blinking on the display, press
the MEMORY/CLOCK ADJUST button.
The track is programmed, and "P-02" is displayed.
3
2
1
11
Programmed Playback (1)
2 4
1 3