Teac LT-1 - Listening to the Radio; Tuning Radio Stations; Improving Reception

14
Listening to the Radio
Press the POWER switch to turn the unit ON.
Press the TUNER button to select "TUNER".
Or, press the FUNCTION button repeatedly to select
"TUNER", when using the remote control unit.
Press the BAND button to select FM or AM.
Select the station you want to listen to (auto
selection).
Turn the TUNING knob to left or right until the
frequency display begins to change.
When a station is tuned in, the tuning process will
stop automatically.
<
Turn the TUNING knob to stop the auto selection.
<
Use the TUNING button, when using the remote
control unit.
4
3
2
1
Selecting stations which cannot be tuned
automatically (manual selection).
Turn the TUNING knob to left or right and hold to
change the frequency continuously. Release it when
the station you want to listen to is found.
Use the TUNING button, when using the remote
control unit.
If the reception is poor
AM broadcast
Turn around the unit to find the best position for AM
stations.
FM broadcast
For a good reception, turn around the antenna so
that you can get the stations clearly.
1 32
4