Teac SB303 - Audio Input Operations; Play with Bluetooth Device; Pair Bluetooth-enabled Devices

11
AdjusttheVolume
- Press the VOL+/–button on the unit or on the remote control to adjust the volume.
- If you wish to turn the sound o, press the MUTE button on the remote control. Press the
MUTE again or press the VOL+/-button to resume normal listening.
Select a Preset Sound Eect
While playing, press the EQ button on the remote control to select between preset equalisers:
Movie (recommended for viewing movies), Music (recommended for listening to music) and
default setting (EQ mode o).
Aux/Mp3 Link/Optical Operation
1 Ensure that the unit is connected to the TV or audio device.
2 While in ON mode, press the SOURCE button repeatedly on the unit or on the remote control
to select AUX or MP3 LINK or OPTICAL Mode.
3 Operate your audio device directly for playback features.
4 Press the VOL+/– button to adjust the volume to your desired level.
Play with Bluetooth Device
You can listen to tracks from a media device if connected to the unit via Bluetooth.
PairBluetooth-enabledDevices
The rst time you connect your bluetooth device to this player, you need to pair your device to
this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the /SOURCE button on the unit or SOURCE button on the remote
control repeatedly to select Bluetooth mode. The Bluetooth indicator will ash slowly.
2 The system has entered pairing mode.
- OR press the "BT PAIR" button on the remote control to be searchable. The Bluetooth indicator
will ash rapidly.
3 Activate your Bluetooth device and select the search mode. “SB303” will appear on your
Bluetooth device list.
4 Select “SB303” in the pairing list. The Bluetooth indicator will light up solidly while the pairing
succeeds.
5 To disconnect the Bluetooth function, switch to another function on the unit or disable the
function from your Bluetooth device.