Teac SL-D96 - How to Preset Stations

38
ENGLISH
How to Preset Stations
1
2
4
3 4
In each band, up to 10 stations can be stored in
preset memories.
Press the FM/AM button to select FM or AM.
Use BAND button, when using the remote control
unit.
Turn the TUNING knob and tune in a station to
be stored as a preset station.
Press the MEMORY/CLOCK ADJUST button.
Within 10 seconds, select a preset channel to
store the station using the REPEAT/PRESET
button, and then press the MEMORY/CLOCK
ADJUST button.
<
If you press the numeric buttons (1-0) of the
remote control unit, you can store the station
directly. In this case you don’t have to press the
MEMORY/CLOCK ADJUST button.
To store more stations, repeat steps to .
41
4
3
2
1
How to select preset stations
1. Press the FM/AM button to select FM or AM.
Use the BAND button, when using the remote
control unit.
2. Press the REPEAT/PRESET button repeatedly
and select a preset channel.
If you press the numeric buttons (1-0) of the
remote control unit, you can select a preset channel
directly. To select preset number 10, press “0” of
the remote control unit.
1
3
2
4
FM/AMREPEAT/
PRESET