Need help?Do you have a question about the Teac SR-L30DAB and is the answer not in the manual?
Describes the analogue stereo audio output (RCA) for connecting to amplifiers or tape decks.
Explains the optical digital audio output for digital recording or external decoding.
Instructions for connecting the provided AC adaptor to the unit's DC IN jack.
Details the AUTO TUNING button and TUNING knob for finding and selecting radio stations.
Explains the initial scan for DAB channels when the unit is first turned on.
Instructions on how to perform an automatic scan to find new DAB channels.
Step-by-step guide to tuning into channels from the DAB list.
Instructions for selecting a previously stored preset DAB station.
Instructions for manually tuning and automatically scanning for FM stations.
Step-by-step guide to storing up to 30 FM stations into memory presets.
How to perform a factory reset to clear station lists and memory.
Solutions for units with no sound, or poor reception due to weak signal or noise.
Guidance when the 'NO stations Available' message appears on the DAB tuner.
Procedure to unplug and replug the unit to reset the internal micro-computer.
To Next Page
General
