EasyManua.ls Logo

Teac SR-L30DAB - Factory Reset Procedure; Clearing Station Memory

Teac SR-L30DAB
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Factory Reset
To clear the station list and
memory
To clear the station list and memory, it is
possible to operate a factory reset function.
To do this hold down the FUNCTION/FM
MODE button for a period longer than 4
seconds, ‘Factory reset...’ appears on the
display.
Specifications
FM Tuner
Tuning range. . . . . . . . . 87.50 - 108.00 MHz
(50 kHz steps)
Signal-to-Noise ratio . . . . . . . . 65 dB (Mono)
60 dB (Stereo)
DAB Tuner
Tunig range . . . Band 3, 174 MHz - 240 MHz
Input . . . . . . . . . . . . . . . . Telescopic antenna
Max signal . . . . . . . . . . . . . . . . . –3 dBm typ
Sensitivity . . . . . . . . . . . . . . . . . –96 dBm typ
Adjacent Channel Rejection . . . . . . 35 dB typ
Digital output . . . . . 24 bit/48 kHz resolution
Speaker System Section
Unit. . . . . . . . . . . . . . . . . . . 7.5 cm Cone x 2
Connectors
Optical digital output x 1
Analogue audio output (RCA) x 1
Headphone out (3.5 mm stereo mini jack) x 1
General
Output Power . . . . . . . . . . . . . . . 2 W + 2 W
Power requirements . . . . . . . . . . . . DC +12V
Dimensions (W x H x D). . 310 x 146 x 95 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . 2.0 kg
Operating temperature . . . . . . . . 0 ˚C - 50 ˚C
Accessories
AC adaptor x 1
Design and specifications are subject to
change without notice.
Illustrations may differ slightly from
production models.

Related product manuals