Do you have a question about the Team C TC02C and is the answer not in the manual?
Brand | Team C |
---|---|
Model | TC02C |
Category | Motorized Toy Car |
Language | English |
Safety precautions and general product information.
Overview of transmitter controls, switches, and indicators.
Step-by-step guide to installing batteries into the transmitter.
Guide to connecting and powering up the RC system components.
List of necessary tools for building the RC car.
Assembly of the initial front suspension components.
Assembly steps for the buffer components.
Assembly of the fifth and sixth sections of the front suspension.
Detailed assembly of front suspension parts with dimensions.
Instructions for building the differential unit.
Steps for assembling the transmission system.
Assembly of the rear chassis plate.
Instructions for mounting the motor onto the chassis.
Assembly of the spur gear and related parts.
Attaching the motor to the assembled drivetrain.
Building the rear suspension components.
Mounting the rear shock tower.
First and second stages of rear suspension assembly.
Assembly of the 20th, 21st, and 22nd rear suspension parts.
Instructions for assembling shock absorbers.
Final shock absorber assembly, including spring tension.
Mounting front suspension with shock absorbers.
Mounting rear suspension with shock absorbers.
Attaching front suspension to the chassis.
Final assembly of rear suspension parts.
Mounting the battery and body support.
Installing the steering servo and selecting parts.
Securing the steering servo to the chassis.
Mounting the receiver and Electronic Speed Controller.
Securing the battery pack in the chassis.
Attaching the rear wing to the car body.
Fitting front and rear tires onto the wheels.
Installing wheels and tires onto the car's axles.
Preparing the car body for painting, including masking.
Painting the car body shell from the inside.
Securing the painted body shell to the chassis.
Selecting track conditions and initial setup parameters.
Adjusting front suspension and shock absorber settings.
Adjusting rear suspension and shock absorber settings.
Specifying front and rear tire and wheel setups.
Configuration settings for motor and battery.
Section for recording comments and additional setup notes.