Troubleshooting Guide
The electrode is deposited with
Use a clean swab and alcohol to clean
cooking residues
Electrode damaged Replace
Burner won't light after Electrode wires are loose or have Reconnect or replace with new electrode
turning and pushing
the knobs fallen off assembly with wires
The orifice is blocked Check the orifice for blockage
Replace with new electrode assembly with
Wire is shorting wires
Open the gas valve and/or replace gas
No gas valve
Burner can't light by
match The gas flow is not smooth Clear the burner tubes
Incorrect alignment between burner Re-assemble ! re-align the burner
and valve assemblies
Yellow or orange flame Incomplete combustion Call our customer service center
with gas odor
The gas hose is bent or kinked Smooth out the hose
The burner or orifice is blocked Clear blockage
Low heat with knob in
"/z/HIGH" position Low gas pressure Call the gas dealer
The grill is not preheated Preheat the grill for 15 minutes
There is excessive fat on the meat Cut off fat before grilling
Flare-up The temperature is too high Adjust
There is a grease deposit Clean
Flame out High winds are blowing out the flame Find a less windy place
Flame lifting The gas pressure is too high Call the gas dealer
Flashback The burner port is blocked Clean burner port
Turn off knobs and gas valve. Leave lid
Grease has accumulated in/on the
Grease fire food open and let fire burn out. Clean the grill
after cooling
If you are still having problems, please call Team Grill Customer Service
at (888) 978-6475 or visit our website www.teamgrill.com.
Team Grill Patio Series GAME-DAY User Guide Page 29
To Previous Page
Loading...
