TECE U2 TECEfilo - Converting the A1 Drain Valve to the A2 Drain Valve; F 10 Filling Valve

Flushing technology
6-6
TECE flushing technology – cistern
Converting the A1 drain valve to the A2 drain
valve
If a drain valve is replaced as a spare part or the new
drain valve is modified because of the additional functions
(./. litre flush, throttle set), the new A drain valve
oers full compatibility with the old A version.
The operating lever, throttles and valve seat are included
in the scope of delivery along with the A drain valve.
36 mm
42 mm
Conversion set 9820223, scope of delivery
The TECE cistern drain valve can be replaced easily.
The old A drain valve should be disposed of, together
with the associated valve seat and seal.
When replacing an old A drain valve with a new A one,
care must be taken to ensure that the operating lever is
also replaced.
F 10 filling valve
The F  replacement filling valve (order number
) universally fits in all TECE cisterns and in many
competing cisterns.
F 10 filling valve
Properties:
• Low-noise in accordance with acoustic group  (DIN
)
• Functional range:  hPa to , hPa
• Minimum flow pressure:  hPa
• Adjustable fill level
• Compact design
• Adjustable outlet pipe