15
L-7
V.c) Manual operation
and valve actuators) independently of the others in order to check if they operate properly.
V.d) Zones
the pre-set temperature by hysteresis value. When the temperature in all the zones is
Submenu of each zone:
V.d.1) OFF/ON
V.d.2) Pre-set temperature
function enables the user to change this value separately.
The main screen displays current pre-set temperature value and the time left (see: Main
screen description).
V.d.3) Weekly control
This weekly schedule is assigned to a given zone only. After the room sensor has been
may be adjusted by the user to individual needs.
To Next Page
Loading...
Need help?
General
