19
L-7
Factory settings
Valve removal
This option is used to delete the valve from the controller memory. Valve removal is used
e.g. at disassembling the valve or module replacement (re-registration of a new module
is necessary)
V.h.2) Internet module
and adjust certain parameters via the Internet. Such online control is possible only after
purchasing and connecting an additional module ST-5072.
select Registration. The controller generates a code which the user should enter on the
Internet website. Detailed description of the procedure is available in the Internet module
instruction manual.
Internet module is a device enabling the user remote control of the regulator via the
Internet. The user controls the status of all valves on the home computer screen.
they may be set manually. The procedure of obtaining these parameters is described in
detail in the instruction manual of the Internet Module
.
V.h.3) Time
This function is used to set current time.
V.h.4) Set date
This function is used to set current date.
V.i) Software version
the controller software version.
To Next Page
Loading...
Need help?
General
