10/29/2019 Tech Works CI-Series Systems Planning & Installation Manual Page 6 of 42
FS-ODC - Operator Foot Switch
The FS-ODC is used in the control room for push-to-talk when hands are busy.
Our Foot Switches are ruggedly designed for harsh environments with a rubber
non-slip pad and 10-foot rubber jacketed cord. The FS-ODC is used in the
control room for push-to-talk when hands are busy.
FS-1-PLUS – Procedure Room Foot Switch
The FS-1-PLUS is used as a call button in the controlled environment to
summon an operator.
CS-520 - Dual-Muff, Noise Cancelling Headset
Mobility is key in controlled environments and our headsets give professionals just
that. Using DECT technology, these headsets provide secure two-way
communications between the controlled environment and operators. Standard
controls on either headset operates features of the CI-Series system such as
listen, talk, mic mute, and level. The CS-520 is a wireless dual-muff noise
cancelling headset with an adjustable boom microphone.
CS-540 - Convertible Headset
The CS- 540 is a flexible, light weight, wireless, over-the-ear-
worn, convertible headset which offers you a choice of wearing
options.
PRO-42 - Boundary Microphone
There are several microphone options for different needs. The PRO-42 is a boundary
microphone which is a high quality and cost-effective solution mounting close to the
audio source.
PRO-45 Hanging Microphone
Our PRO-45 hanging cardioid microphone is a very high quality and easy to install
microphone; just watch out for hanging equipment.
To Next Page
Loading...
