EU-290 user’s manual
11
Manual mode
In this mode the pre-set temperature is adjusted manually from the main screen view with the
use of these buttons: + or - . Manual mode is activated when one of these buttons is pressed.
When the manual mode is activated, the previous operation mode enters ‘sleep mode’ until the
next pre-programmed temperature change. Manual mode may be deactivated by pressing EXIT
button.
Example 1 – manual mode activation in Day/night mode
When Day/night mode is active, the user changes the pre-set temperature by pressing + or -,
which automatically activates manual mode.
The controller returns to Day/night mode when daytime changes into nighttime (or the other way
round) or when the user presses .
Example 2 – manual mode activation in weekly control mode
When weekly control is active, the user changes the pre-set temperature by pressing + or -, which
automatically activates manual mode.
The controller returns to weekly control mode when, according to the weekly schedule, economical
temperature changes into comfort temperature (or the other way round) or when the user presses
.
Manual mode
To Next Page
Loading...