TECH
16
A – pre-programmed change from economical temperature to comfort temperature
Activating this function means that at the time of pre-programmed change of the pre-set
temperature from comfort to economical or the other way round, the current room temperature
is close to the desired value.
In order to configure this parameter, press or
until Optimum start setting panel appears on the
screen.
Use + or - to activate or deactivate Optimum start
function. Press to confirm and move on to edit
the next parameter or press and hold MENU to
confirm and return to the main screen view.
VII.c.7) Service menu
Certain functions in the controller service menu are
secured with a code. In order to adjust their
parameters, press or until Service menu
settings appear on the screen.
To view the service menu it is necessary to enter
the code – 215. Use + or – to select the first digit
(2) and press MENU to confirm. Follow the same
steps selecting the remaining two digits.
To Next Page
Loading...