Techbase MBus Gateway - Troubleshooting; Problem with Detection Meters

TECHBASE (C) MBus Gateway RTU 7/8
© 2014 TECHBASE
Group
Technical contact - support.techbase.eu 7/8
4. Select the
“Modbus_SMBUS”
channel
5. In this view
you can change
RTU port
configuration
(You can edit in
the fields marked
in red square)
6. For apply
changes please
click “OK” button.
7. Please click
Menu button in
side menu.
8. Please click
Save as current
config button.
Troubleshooting
1. Problem with detection meters
If you have problem with detection meters. First you need to check connection and then use
mbus_scan. If you connect your meter in correct way, result of mbus_scan should look like in this
example: