Techfrost E Series - 9 “HACCP FUNCTION; 9.1 Preliminary instructions

43
www.techfrost.com
ENGLISH
ver; departed 1 min from the signaling that the test has not been completed with success without
having operated the cycle you/he/she is started to time.
If the probe is not inserted, the test won’t be performed (neither the rst neither the second phase).
9 “HACCP” FUNCTION
9.1 Preliminary instructions
Through the function “HACCP” it is possible to memorize up to 9 events for each of the 3 alarms
HACCP, then the most recent event is written on the older one.
The following chart illustrates the information related to the alarms HACCP that the device is able
to memorize.
Alarm Code Critical value Date and
hour of
event
Duration
alarm temperature
blast chilling
or temperature
blast freezing
not concluded
within the
maximum duration
tiME the maximum temperature
noticed by the core probe after
the temperature blast chilling
or the temperature blast
freezing not concluded within
the maximum duration
yes from 1 min to 99
h and 59 min,
partial if the
alarm is in
progress
maximum tempe-
rature alarm
during the mainte-
nance
AH cell maximum temperature
during the alarm
yes from 1 min to 99
h and 59 min,
partial if the
alarm is in
progress
alarm stop feeding
during the
conservation phase
PF cell temperature during the
feeding restore
yes from 1 min a 99 h
e 59 min
from 1 min to 99h
and 59 min
Per evitare di memorizzare ripetutamente allarmi interruzione dell’alimentazione (codice “PF”) assi-
curarsi che il dispositivo sia nello stato “stand-by”
o nello stato “on” prima di scollegarne l’alimentazione.
Se la durata dell’allarme interruzione dell’alimentazione (codice “PF”) è tale da provocare l’errore
orologio (codice “rtc”), il dispositivo non memorizzerà né la data e l’ora in cui l’allarme si è manife-
stato né la sua durata.
Il LED HACCP fornisce informazioni relative allo stato della memoria degli allarmi HACCP del dispo-
sitivo.