Technaxx TE22 User Manual

Output power
2000W (maximum, continuously), 4000W
(peak)
Output voltage USB (DC)
5V-12V
Output voltage Schuko
(AC) / AC frequency
230V / 50Hz nominal
Output Waveform
Sine wave
Nominal load efficiency
85%
Low battery voltage
shutdown and alarm
at ~10.2V
USB output ports (DC)
~30Watt (share)
AC output
2x Schuko port
Circuit protection (DC
overload)
6x 40A internal car fuse (replaceable;
suggested by technical)
Weight / Dimensions
4.2kg / (L) 36,0 x (W) 26.0 x (H) 11.9cm
Package Contents
Car Power Inverter with 2 USB Ports TE22,
2x0.6m connection cable, User Manual
Normal use
The power inverter is intended to convert 12 V direct current voltage to
⚫ alternating current voltage 230 V/50 Hz and/or
⚫ direct current voltage of 12 V/max. 3000 mA (USB-A QC3.0)
⚫ direct current voltage of 12 V/max. 3000mA (USB-C)
→The power inverter is only intended for permanent installation.
→This device is not intended for use by children or persons with limited
mental capacity or lacking experience and/or lacking expertise. Children
should be supervised to ensure they do not play with the device.
→This device is not intended for commercial use.
→Any other use or modification of the device is considered improper and
involves significant risks. The manufacturer assumes no liability for
damages due to improper use.
Intended sites
The power inverter is intended for installation in
⚫ Automobiles (and lorries)
⚫ Caravans
⚫ Boats
with 12V batteries.
Do not place the power inverter:
⚫ near heat sources (radiators, direct sunlight), flammable materials,
battery compartment or starter battery,
⚫ moist locations or locations exposed to dripping or splashing water,
⚫ in environments with explosion hazards

Technaxx TE22 Specifications

General

Brand	Technaxx
Model	TE22
Category	Inverter
Language	English