(2) Both USB ports share the max. of 6000mA
(4) Turns the inverter ON and OFF (Press Button for 3 secs)
(5) LED green: Inverter is working, LED Yellow: Low Voltage Alarm or
Overload prtotection, LED Red: connected with Battery
(13) High speed cooling fan. When the temperature inside the inverter
exceeds a preset limit, the cooling fan automatically turns on to cool the
inverter. When the temperature reduces, the fan turns off.
Determine Battery Capacity
Battery type and battery size strongly affect the performance. Therefore,
you need to identify the type of loads your inverter will be powering and
how much you will be using them between charges. Once you know how
much power you will be using, you can determine how much battery
capacity you need. Technaxx recommends that you purchase as much
battery capacity as possible.
CAUTION: Risk of inverter damage.
⚫ The inverter must only be connected to a battery that has a nominal
output of 12V. ⚫ Not operate if connected to a 6/24V battery
Voltage converter installation
Install the power inverter with suitable screws (not included):
⚫ in sturdy and even locations,
⚫ on clean, dry and non-flammable surfaces,
⚫ in well ventilated areas.
Please be sure not to cover the vents.
Connecting the inverter
This Inverter has two DC cable connections, one positive and one
negative. The order of steps in the following procedure minimizes the
To Next Page
Loading...
Need help?
General
