Technaxx TX-146

13
Device ID adding: On the bottom of the TX-146 you will find a sticker with ID
number (and bar code). This ID number is the Device ID. Users can add the
device by entering ID manually (or scanning the bar code).
Fill in the device name, username and password for the camera. The
password was customized by you while WiFi configuration. The standard
username is admin. Click on complete in the top right corner to save the
settings.
5.2 & 5.3 Choose LAN
scan or Networked
devices.
5.2 Manually or with bar
code scanning enter the
Device ID. Fill in device
name, username and
password.
5.3 Choose the found
Device ID, enter a
device name, username
and password.
5.3 Adding device from the same network
This mode is to add the device which is already configured and connected to a
network, to the App and view the live video (see picture 5.3).