64 -128GB must be formatted via the App or via the monitor! It
could be necessary to format until the App shows MicroSD
status: Formatted.
Click and check if there is new software version. If there is,
click and update directly to achieve OTA upgrade of the
device. If the version is already the newest, there will be a
prompt.
Set the WiFi channel. Choose between 1-13. Inform you which
channel are used mainly in your neighborhood to avoid
interferences and a bad signal.
Time syncing between Smartphone and camera.
Time zone is set automatically. If not, adjust it here.
Enable/disable summertime. Choose country. (maybe not
available)
Admin is a fixed username, cannot be changed.
Click on password to change the old password to a new one.
Device name: The channel can be named.
Equipment model: Camera model, cannot be
changed.
Software version: Installed firmware of the camera
Device signal detection: Check the signal strength
of the transmission between camera and monitor.
Mode: Change between Auto, white light and night
time. (Not available for this model!)
Alarm settings: (Not available for this model!) Set
the alarm schedule via the monitor.
Privacy zone setting: Set the privacy zone to
blacken the live view and the recordings partly. E.g.
if you can view into your neighbours garden or you
have to blacken public area.
To Next Page
Loading...
Need help?
General
