2. Set the Date and Time of
camera or sync with PC
time.
After setting Date and Time
click on “Save Camera
Settings” to save the setting.
Time setting, can synchronize
computer time or set
manually.
3. Formatting MicroSD card
Before using the device for the first time or after replacing the
MicroSD card, it must be formatted, so as to facilitate the
optimization of the machine. The MicroSD card is only useable
after the system is formatted on a PC, otherwise it can cause
errors.
Note: The tool needs to unplug the USB cable after formatting the
machine, and then insert it into the PC again to correctly display
the blank MicroSD card after formatting.
Storage medium: MicroSD card * up to 512GB (Class10) [* not
included]
Info: ⚫ Cards up to 32GB must be formatted in FAT32.
⚫ Cards of 64GB or more must be formatted in exFAT.
4. Settings
According to your need you
can set following settings:
- Monitor Mode
- Photo Series
- Motion sensor (PIR) Delay
- Video Length
- Endless Capture
- Date / Time Stamp