18
Model: TX-187 Article No. 5001, 06/2022
Configuration
Set up and configure the device.
Time Display
Enter the setting to choose Analog or Digital clock for standby display.
Choosing digital, set the color of the digital clock numbers as well.
Confirm your choice by pressing Enter.
Network
Wireless Network Configuration:
Enable / disable WiFi network.
When you enable the WiFi network, the
system
will automatically
scan for WiFi networks in the
range of the
TX-187.
Select your required WiFi router.
You may refer to the
chapter First start
network setting.
Wireless Network (WPS PBC):
If you are using a router with WPS/QSS button,
you may set up the network connection simple via
WPS function. Enable the connection by enter
the setting. After that
on your router within 1
connection between the router and TX-187
will
then be configured automatically.
Manual Configuration:
Set the wireless configuration manually. You can choose DHPC (IP
assigned automatically) or manually input IP address for wireless network
connection.
After that set the SSID choose the encryption code to connect the WIFI.
If the wireless network connection is not existed or failed, the icon at the
top left corner will have a cross on it.
To Next Page
Loading...
Need help?
General
