Technaxx TX-187 User Manual

21
Model: TX-187 Article No. 5001, 06/2022
Dimmer
Configure the brightness of backlight on the
display.
Select ”
Power Saving
” to set the brightness of
backlight in standby mode and select “
Turn On
”
to
set that in operation mode.
Display
Set the display to Color display or Monochrome display. The symbols of
the modes are displayed accordingly.
Power Management
Configure to go to standby mode automatically during in the menu or/and
without WiFi signal.
Choose the power management timer (5/15/30mins) to set the duration of
the radio to switch standby mode automatically when you are not
controlling it.
Choose “Turn Off” to ignore the power management function.
Sleep Timer
Turn off or set the sleep time of
15/30/60/90/120/150/180 minutes. Once the time
is set, there will be a bed icon with remaining
minutes at the top right comer and
TX-187
will
turn to standby then.
Weather
TX-187 is able to display the current weather
i
nformation under standby mode.
First set your
location or the location where the
TX-187
is
placed. Use the Knob (
5
) and the remote to
navigate through the menu. Confirm the points
one by one using Enter on the device or the
remote. S
et Temperature Unit (°C or °F) and t
urn
on
Show in
Standby to get the weather displayed
at the standby mode.

Technaxx TX-187 Specifications

General

Brand	Technaxx
Model	TX-187
Category	Radio
Language	English