Wall holder Installation
Table holder Installation
Installation of MicroSD memory card
1. Insert the storage card in the way as shown in the diagram until you hear a
clicking sound.
2. Improper insertion of storage card may cause system failure, please confirm
the inserting direction of the card.
3. Take out of the storage card. Push in the storage card until you hear a clicking
sound, then the storage card will pop up.
Storage Card Introduction
●
This product adopts MicroSD card as external storage device, when there is
no storage card in the product, the photo-taking and video-recording
functions are unrealizable.
●
If a self-provided storage card is used: Use a storage card with Class 4 or
above. Up to 4G storage card supported. This machine has automatic cyclic
storage function, when the storage card is full, the original file will be
overwritten. This machine can connect to computer by USB line. Or take out
the MicroSD card and connect to computer by card reader.
ATTENTION: do not distort, extrude or strike the storage card, otherwise
the audio-video material recorded on it may be damaged.
To Next Page
Loading...
Need help?
General