76
body fat test program
2.5: “PULSE”
window: Displays the
pulse
numerical value
when testing the heart rate.
Displays
incline numerical value
when press the quick incline key.
2.6:
the touch key buttons operate in the same way as those on the main overlay
(Ⅲ)Button
instruction:
3.1: “PROG”: program select key: when the treadmill has stopped, cycle select the program
P0-P26
you require.
3.2: “MODE”: mode select key, when the treadmill has stopped, set the Mode you require. You
can select the Time countdown →distance countdown →calories countdown →
Normal mode.
The
default setting will re-activate after 30 minutes
when in
P1-P26.
3.3: “START” Key: when the treadmill has stopped, press the START key to turn on the
treadmill. Press “START”
key when running
and
it will pause.
3.4: “STOP” key, when the treadmill is running,
stop the treadmill by pressing the STOP key.
When the LCD window shows the ERR message, press the stop key to clear it. When the
treadmill stops, press the “STOP” key, it can return to the default
display status
3.5: “+” KEY: increase the speed when running.
Increase
the parameter
under the body fat
testing.
3.6: “–“ KEY: decrease the speed when running.
Decrease
the parameter
under the body fat
testing.
3.7: “QUICK SPEED” key: when the treadmill is running, select the
quick speed key 4,8,14
that
you want by pressing the appropriate key.
3.8: “
“ KEY: Decrease the incline by pressing this key.
3.9: “
“KEY: Increase the incline by pressing this key.
4.0: “QUICK INCLINE KEY: Increase the incline directly by pressing the quick incline key
4,8,12
In any state, if you pull-out the safety key, the window displays
”E7”
and it will sound the
buzzer “BIBI-BI”. Then replace the safety key, window will light up for 2 seconds, then go to
manual start mode (the equivalent of clearing reset).
Auto sleep function
Note that this treadmill is fitted with
an auto sleep function. If the treadmill
is not used for 4 minutes and 30 seconds
Th computer will automatically turn off.
Press any key to restart the console.
Your data will be retained.
Safety key function:
( )
Ⅴ
Ⅰ
Ⅴ
(
)
To Next Page
Loading...
