Page 13
The DCI401MCS will also control most televisions. The user can program the remote to control
a TV using infrared signal. The remote contains a US universal IR database. The remote control
contains IR codes for the following TV functions: Power-toggle, Input, Volume+, Volume-, and
Mute.
Below are instructions to program the remote for a TV. Instructions for remote pairing and TV
programming are included in the DCI401MCS box.
1. Press and hold both the 1 and 3 buttons until the red light above the DTA Power button
turns on.
2. Point the DCI401MCS remote at the TV while it is powered on.
3. Press and hold the TV Power button until the TV turns off. Release the TV power button
for two seconds to lock in the code.
4. Point the remote at the TV and press the TV power button. The TV should turn on. The
volume, mute and input buttons should now control the TV.
5. Included in the DCI401MCS box is an instruction set for pairing and programming the
remote. You should leave several of these aids with your customer for future reference.
There are two additional buttons on the remote that will control functions.
A = Closed Captioning
B = Display settings
To Next Page
Loading...
Need help?
General