Technicolor DCI401MCS User Manual

Page 14
Performing a Channel Scan
Upon initial power up the DCI401MCS will perform a channel scan. If PSIP mapping is being
used the channels mapped in the EPG will load.
A manual scan may be performed from the DCI401MCS menu.
If IPG is used a manual scan will be required after the guide.xml file is created.
Navigate to the menu and select Channel Scan.
Select Clear current channel list and click Scan
Progress bar will appear on screen

Technicolor DCI401MCS Specifications

General

Brand	Technicolor
Model	DCI401MCS
Category	Security System
Language	English