Page 26
IPG Channel Guide Setup
Before you start creating a guide click on the Discover tab to load recent changes into the guide
files.
Navigate to the EPG tab of the COM46 user interface. To activate the IPG you must enter a 3 in
the Mode field. Do not enter an IP address or port assignment.
Set the Timezone offset and Timezone Psip fields to reflect your location.
Click on Guide.xml and the currently playing channels will load.
The channel information loads with the DIRECTV channel numbers as default, if left as is the
DCI401MCS will be mapped to the DIRECTV channel lineup. You can edit the channel
mapping as you would in an EPG system by changing the default number to the property
requested lineup as shown below. See the COM2000 Integrators Manual for details.
To Next Page
Loading...
Need help?
General