Page 38 / 85
WAN side. Note that page access is limited to only those who know the gateway access password.
When accessing your gateway from a remote location, your must use HTTP port 8080 and the WAN IP
address of the gateway. e.g., if the WAN IP address is 157.254.5.7, you would navigate to
http://157.254.5.7:8080 to reach your gateway.
Multicast Enable enables multicast traffic to pass WAN LAN. You may need to enable this to see
some types of broadcast streaming and content on the Internet.
UPnP Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can automatically discover
the services from other registered UPnP devices on the network.
You can also to Enable or Disable other NAT ALG status for your LAN side.
To Next Page
Loading...
Need help?
General
