66
Manual WLAN Modem Manual WLAN Modem
67
2 Manual installation – modem cabling 1 Automatic installation from the Installer CD
(Windows & MAC)
If your computer does not have a CD/DVD drive, please follow the instructions for
manual installation described in the following section.
The installation is very simple with the Installer CD that comes with the Internet &
Phone Manual. This shows you how to correctly cable your WLAN modem step by step.
In addition, the Installer CD also establishes the wireless connection between the WLAN
modem and your computer and, with a Windows XP operating system, optimises the
settings used for Internet access.
The later Windows or Mac OS X operating systems have already been configured for
very high bandwidths and do not usually need to be adjusted.
Connect the WLAN modem and the cables as described. For manual installation, the
WLAN modem does not need to be connected to the computer.
Online
Phone 1
1
If you would like to operate your modem from the same cable box as your Digital TV
Mediabox, connect it using the multimedia adapter
a
.
Otherwise, connect your WLAN modem directly to the TV socket
b
or
c
.
2
Connect the power supply unit to the power outlet and the WLAN modem.
3
You can connect a computer directly with the network cable. This requires no further
installation.
4
If your telephone line is also operated by upc cablecom, connect your telephone to
“Linie 1” now.
› The modem activation process can take up to 30 minutes and is complete when the
“Online” LED is lit up constantly. With Phone, the LED “Phone 1” should also be lit up.
To Next Page
Loading...
Need help?
General
