70
Manual WLAN Modem Manual WLAN Modem
71
3.2 Manual WLAN set-up with Windows Vista
The details you require to set up WLAN can be found on the bottom of the WLAN
modem.
Carry out the following steps if you would like to set up a wireless connection
on Windows Vista.
1
Click on the network symbol at the bottom right-hand corner of the taskbar.
2
Now search for the available wireless networks.
3
Now select your network and click on “Connect”.
You will find your network name on the bottom of your WLAN modem.
It is called SSID and starts with UPC. Please ensure that you select 2.4GHz SSID.
4
Now enter the relevant password twice and click on “Connect”. It can also be found
on the bottom of your WLAN modem below the SSID. Then click on “Connect”
(Attention: The password is case sensitive.).
2.4GHz SSID: UPC0045609
2.4GHz SSID: UPC0045609
2.4GHz SSID: UPC0045609