Technics FG SERVO SL-BD22D - Operation

Test Ci
Operation
45-rpm adaptor Strobe lines This unit's strobe illuminator operates at the AC tine frequency
which generally has a 0.2% fluctuation.
This fluctuation, when present, may make the strobe pattern
appear to change. However, actual platter speed does not
change, because the DC motor is not affected by AC power line
frequency. : Sener ae
Piatter mat
Notes:
*DHo noi try to ciean the dust cover
while a disc is playing, because
static electricity might cause the
tonearm to rise.
Tonearm - @The unit is in the standby condition
when the AC power supply cord is
Arm rest connected.
The primary circuit is atways "live"
as long as the power cord is con-
Set
to"
7"
to
stop
:
nected
to
an
electrical
outlet.
the play temporarity.
Set to“ ¥" to resume the play.
Stop switch
Press to stop the play-
Plich control
Remove the
et
4
stylus
protector.
(The tape on side of cartridge
prevents the stylus assembiy from
snaking loose during shipment.) a-_—
3 { Cueing control |
Setto" 2”,
Protector
Move to the desired position.
(The strobe-illuminator/pitot lamp will tight and the
|
Speed
selector
platter
will
start
turning.
)
2
Cartridge
Set to disc's speed.
(TE is the standard mark for the “P-mount” plug-in
connector system. Products carrying this mark are inter-
changeable and compatible with each other.
7 Place a disc on the platter mat. Setto* z”.
(Piay will start.)
@ Fora 17-cm (7") (large center hole) disc @ When play ends
1. The tonearm wili automatically return to the arm rest (the
automatic return feature).
2. Rotation will stop.
[Atteruse
e- 45-rpm adaptor Attach the stylus protector.
REY Platter mat
Protector