Technics FG SERVO SL-BD22D - Turntable Assembly

Accessories
Platter mat {1) AC power supply cord (1) Stereo connection cable (1) Ground wire (1) -_ 45-rpm adaptor (i : .
Turntable Assembly
1.
Remove
the
packing
spacers.
3.
Place
the
platter
mat
on
the
platter,
and
turn
the
platter
about
ten
times
clockwise.
Platter
;
(This
sets
the
rotation
mechanism to the
correct pasition.)
4. Install the dust cover,
Connections
AG power supply cord (included) i} “—y or AC outlet on amplifier
(A)(L) (GND)
| Ground wire (included)
ade if the ground wire is not connected.
a “hum" noise may be heard.
Stereo connection cable (included)