Technics RS-676US

A. Distortion Factor Measurement
a. Frequency (Fundamental wave)
b. Measurement
c. Input
d. Fundamental Wave Attenuation
B. Level Measurement
a. Measurement
b. Frequency Response (1 kHz basis)
c. Input Impedance
d. Error in Indicated Value
C. Output Terminal
a. Frequency Response
b. Output Voltage
(3
Ww
Attenuator
400 Hz 1 kKHZz+10%
0.1~100% (6 range)
50mV~50V
— 60 dB or more
1 mV (—60 dB) ~30 V (30 cB) 9 range
20 Hz~100 kHz+0.3 dB
1MQ+10% Less than 50 pF
With in +3% at 1 kHz
10 Hz~100 kHz+1 dB
100 kHz~1 MHz+3 cB
1 Vrms+10 % (1 KHz Sine Wave)
a. Input Impedance
b. Maximum Attenuation
c. Minimum Attenuation
(4) Oscilloscope
Ba
600Q Unbalanced
“121 dB
0.1 dB