Technics RS-BR465

HSI19N3
Playback coninues
Technics Slereo Cassette Deck RS-AR465
power
[|
TsiandbyOaon
bese .6 rec levet
peak level meler(aB)
Become ee BEE sgh ine ae be Jett bY,
' |———~ right
des © ©
‘aula Tepe seen —— Datby NA
<j] autoreverse [>
Headroom Extension HX PRO
vecapteney vet
ao
L
IEE
© © 6
et
bias adjust L—mic—R
‘Quick Reverse/CD Synchro Edit
phones.
Headphones
(not included)
To listen through headphones
Connect headphones (not included) to the head-
phones jack.
Plug type: 6 mm phone plug, stereo type.
Note:
Avoid listening for prolonged period of time to prevent hearing
damage.
Automatic-tape-select function
The unit is equipped with the automatic-tape-select feature; it
automatically detects the type of tape being used, and then makes
the suitable adjustments accordingly of the bias and equalization.
(The tape-select indicator will then illuminate.)
Quick-reverse function
This
is
a
function
by
which
the
unit
detects
the
leader
tape
(the
transparent
tape
at
both
ends
of
the
magnetic
tape)
and
then
automatically
reverses
(in
about
one
second)
the
direction
of
the
tape
movement
during
playback
(or
recording).
shhh
Magnetic tape (where recordings are made)
Leader tapes (no recordings can be made)
in order to avoid an operational error at the beginning of the tape,
this
function
is
not
effective
until
about
15
seconds
after
playback
(or recording) first starts.
eThis function does not operate for tapes that do not have leader
tapes.
eThis function may not function correctly:
If the leader tapes are colored.
If there is dirt or dust on the tape.
If the magnetic part of the tape is thin.
If a strong light (direct sunlight, a spotlight, etc.) is shining into the
cassette holder.
When the unit is subjected to a strong impact.
When
the
quick-reverse
function
is
not
activated,
the
tape’s
direction
of
movement
will
reverse
when
the
tape
reaches
its
end.