Technics RS-BX606

Operation section
®
®
CTIMER
REC SOFF. gPrry
Timer switch (~) TIMER)
This switch is used to automatically begin a tape recording or
tape playback at a certain time, selected by an optional timer.
Counter buttons (COUNTER RESET/MODE)
RESET: This button can be used to reset the tape/linear
counter indication to “000_’/“00.00”.
MODE: _ This button can be used to select the tape/linear
counter indication.
Memory-mode button
(MEMORY REPEAT/STOP)
REPEAT: This button can be used to set this unit to the “A~B
repeat” mode.
This button can be used to rewind the tape to the
preset “0000” point when the rewind (<<) button
is pressed.
Meter-range selector (METER RANGE)
This selector can be used to select the meter-range display of
the input level meter.
Multiplex filter switch (MPX FILTER)
This prevents the Dolby circuit from operating in error when FM
stereo broadcasts are recorded using the noise reduction
function.
STOP:
Dolby noise-reduction buttons (DOLBY NR)
These buttons are used to reduce the hissing noise heard from
the tape. This unit is provided with both the B-type and C-type
noise-reduction systems.
RS-BX606
Rewind/fast-forward/search button
(<< REW, >> FF, [TPs))
These TPS (Tape Program Search) buttons are used to
advance or rewind the tape, or to easily and quickly search for
the program’s beginning on the tape.
Stop button (m STOP)
This button is used to stop the tape movement.
Playback button (» PLAY)
This button can be used to start the playback or recording of the
cassette.
(The tape will then begin moving in the left-to-right direction.)
Pause button (ff PAUSE)
This button is used to temporarily stop the tape playback or
recording of the deck.
Automatic-record-muting button
(© AUTO REC MUTE)
This button is used to tape a silent interval on the tape while
recording is in progress.
Record button (@ REC)
This button is used to set the deck to the recording stand-by
mode.