Technics RS-TR165 Operating Instructions

Playback
Playback Playback
indicator indicator
Switch
ON
the
amplifier,
and
select
its
“tape”
input source.
a timer
Switch OFF the timer switch.
3 power
Switch
ON
the
power
switch.
eject
4 Press the eject button for deck 1 or deck 2
to be used for playback, and then insert the
cassette tape. c=
(The part of the cassette where the tape (Fosar y
is exposed should face downward.) a
|
Da Eres
a Press the playback button.
(The playback indicator will illuminate, and playback will
begin.)
Bp
Coeck2
oniy
)
play/® : Plays side “‘A’’. (side facing outward)
play/<q : Plays side ‘‘B”.
(The playback indicator will illuminate, and playback will
begin.)
pause | | stop
HiTo temporarily stop playback
(deck 2 only)
pause|
Press
the
pause
button.
(The playback indicator will begin flashing.)
To resume playback, press the play button corresponding to the
side of the tape being played.
WiTo stop playback
stop|
Press
the
stop
button.
(The playback indicator will switch OFF.)
HiNotes
e Deck 1 and deck 2 cannot be used for playback at the same
time.
© Do not press the eject button while the tape is moving; doing so
might cause a malfunction or damage the tape.
e While deck 2 is being used to make a recording (from LINE-IN),
deck 1 can be used for fast-forwarding or rewinding a tape.
Should the playback button of one of the decks be pressed
while the other deck is in the play mode, playback of the first
deck will stop.

Technics RS-TR165 Specifications

General

Brand	Technics
Model	RS-TR165
Category	Cassette Player
Language	English