To Next PageTo Next Page
Need help?Do you have a question about the Technics RS-TR575M2 and is the answer not in the manual?
Audio Specifications| signal-to-noise ratio (NR off) | 56 dB (A weighted) |
|---|---|
| signal-to-noise ratio (Dolby B NR on) | 66 dB (A weighted) |
| signal-to-noise ratio (Dolby C NR on) | 74 dB (A weighted) |
Electrical Specifications| bias frequency | 80 kHz |
|---|---|
| input sensitivity and impedance | 100 mV/47 kΩ |
| output voltage and impedance | 500 mV/500 Ω |
Power| power supply (UK, Australia, NZ) | AC 230-240 V, 50/60 Hz |
|---|---|
| power supply (Others) | AC 110 V/127 V/220 V/230-240 V, 50/60 Hz |
| power consumption (UK, Australia, NZ) | 28 W |
Weight and Dimensions| dimensions (W x H x D) | 430 x 136 x 285 mm |
|---|---|
| weight | 4.4 kg |
| tape speed | 4.8 cm/s |
Advice on where to position the unit to avoid damage and ensure longevity.
Warning against placing heavy items on the unit or its power cord.
Caution regarding the use of appropriate AC power sources and avoiding DC sources.
Guidelines for preventing damage to the AC power cord to avoid fire or shock.
Warnings against inserting foreign objects or spilling liquids into the unit.
Advice on seeking professional repair and disconnecting power when not in use.
Step-by-step instructions for safely replacing the fuse in the AC power plug.
Instructions for adjusting the unit's voltage selector to match the local power supply.
Explanation of the Dolby NR system for reducing tape hiss.
Explanation of the three different modes for tape auto-reverse playback.
Explains the ATC function for optimizing recording conditions.
