Technics RS-TR575M2

Technical specifications
I CASSETTE DECK SECTION S/N (signal level=max recording level, TYPE n type tape)
Deck system
Stereo cassette deck
NR off
56 dB (A weighted)
Track system
4-track, 2-channel
Dolby B NR on
66 dB (A weighted)
Recording system
AC bias
Dolby C NR on
74 dB (A weighted)
Bias frequency
80 kHz Input sensitivity and impedance
Erasing system
AC erase REC (IN)
100 mV/47 kii
Heads
Output voltage and impedance
DECK 1
Recording/Playback head
PLAY (OUT)
500 mV/500 a
(Permalloy) XI
HEADPHONES
30 mV (8 12)
Erasing head
(Load impedance 8 C2-600 0.)
(Double-Gap ferrite) XI
DECK 2
Recording/Playback head
■ GENERAL
(Permalloy) XI
Power supply
Erasing head
For United Kingdom, Australia and N.Z.
Motors
(Double-Gap ferrite)X1
AC 230-240 V, 50/60 Hz
For others AC 110 V/127 V/220 V/230-240 V, 50/60 Hz
DECK 1
Capstan drive
Power consumption
(DC Servo Motor) XI
For United Kingdom, Australia and N.Z. 28 W
Reel table drive
For others
32 W
DECK 2
(DC Motor) XI
3.8 W (Remocon Standby)
Capstan drive
1.9 W (Power Standby)
(DC Servo Motor) XI
Dimensions (WXHXD)
430X136X285 mm
Reel table drive
Weight
4.4 kg
(DC Motor) XI
Tape speed
4.8 cm/s
Note:
Wow and flutter
0.07% (WRMS)
Specifications are subject to change without notice.
±0.2% (DIN)
Weight and dimensions are approximate.
Fast forward and rewind times ’
Approx. 50 seconds with
C-60 cassette tape
Frequency response (Dolby NR off)
TYPE I (NORMAL)
40 Hz-15 kHz, ±3dB
20 Hz-16 kHz (DIN)
TYPE H (HIGH)
40 Hz-15 kHz, ±3 dB
20 Hz-16 kHz (DIN)
TYPE IV (METAL)
40 Hz-16 kHz, ±3 dB
20 Hz-17 kHz (DIN)
Matsusita Electric Industrial Co., Ltd.
Osaka 542-8588, Japan
RQT4645-B
H0898V0